Studio Photographer usually have to work with bulky strobes and lighting equipments. These equipments are hard to carry and set up, making changing of scene locations difficult.
With our Digital Studio Slave Flash DSM686, you have the option to use a flash instead of a strobe in your studio.
This flash has a 58(m) guide number! So you basically can replace your bulky strobes by this flash.
Its compact size also allows you to take it around very easily. It can be used outdoors as well as inside a professional studio.
It has Optical Slave sensor built-in so it can serve as a standard slave unit.
You can also trigger it by a radio remote device connected to the 3.5mm miniphone port of this flash and by a camera connected thru the PC Sync Terminal.
|Bounce Head||Swivel Head|
Side View 1
Side View 2
- Stand, Sync Cord
|Guide Number (ISO100/DIN21)||58(m)/190(ft) at 85 position|
|High Speed Charging Support||Yes|
|Power Ratio||1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64|
|Standard Slave||Instant sync with external strobe|
Skipping 1-2 flashes
|Ready Indication||Front & Rear|
|Overheat Protection||Flash stops working after |
~20 continuous full power firing
|Bounce Position||0 / 45 / 60 / 75 / 90 degree|
|Swivel Position||left 180 degree / right 90 degree|
|Recycle Time||Approx. 0.3 - 7 seconds|
|Power Source||4 X AA batteries|
|Dimension (W x L x H)||60 x 72 x 185 (mm)|
|Weight (w/o batteries)||Approx. 300g|
|Optional Accessories||2m Miniphone-PC Sync Cord X 2|
DP101 High Speed Charger(Optional)